The P3, SVGA, and Tx Monitor TOC

Table of Contents

CHAPTER 1.     THE P3 PANADAPTER  1

1.1        Introduction       1

1.2        How it Works    1

1.3        P3 Options       2

1.4        K3 – P3 Cabling and Connections          2

1.5        Configuration and Calibration     5

1.6        The Basic Screen Layout           6

1.6.1     Fixed Spectrum – Tuned VFO (Fixed-Tune) Display Mode           6

1.6.2     Fixed VFO – Tuned Spectrum (Tracking) Mode   8

1.7        Front Panel Controls and Functions        10

1.7.1     DISPLAY/AVERAGE     10

1.7.2     REF LVL/SCALE           11

1.7.3     SPAN/CENTER 13

1.8        Cursors and Markers     17

1.8.1     CURSORS        17

1.8.2     MARKERS        18

1.9        Pulling Weak Signals out of the Noise    19

1.10      Menu Functions 21

1.10.1   Programmable Function Keys    25

1.11      KE7X’s Favorite Set Up 27

1.12      Why . . .?          28

1.13      P3 Utility Program         29

1.14      The P3 SVGA Display Option    29

1.14.1   SVGA Screen Display   30

1.14.2   SVGA Menu      31

1.14.3   SVGA Data Terminal Receiving  33

1.14.4   SVGA Data Terminal Transmitting           34

1.15      Transmit Monitor           38

1.15.1   TX Monitor Menu           40

1.15.2   TX Monitor Displays      41

1.15.3   TX Monitor Power Measurements           43

1.15.4   Example TX Monitor Waveforms            44

Comments