Home‎ > ‎Macro Programming‎ > ‎

Macro Examples

Macro Examples

5.4.1      K3S/K3 Macros  87

Basic Split            87

Basic Unsplit       87

Mic Sel Front Panel         88

Mic Set Rear Panel          88

Mic Sel Line In   88

Normalize VFO A and VFO B Filters.         88

Set and center VFO A filter          89

Set and center VFO B filter          89

CW Single Band Set         89

SSB Single Band Set         90

AFSK Single Band Set      90

FSK Single Band Set         91

PSK Single Band Set        91

Auto Spot            92

Clean up.             92

Split CW, listen on VFO A, transmit on VFO B       93

Split SSB, listen on VFO A, transmit on VFO B       93

Split, listen on VFO B, transmit on VFO A               94

Remove split      94

Toggle between split and unsplit              95

Using a K•Pod button to toggle split/unsplit        96

20 m CW              96

20 m SSB              96

20 m RTTY            97

20 m PSK              98

20 m CW SO2V contest  98

10 m CW SO2V contest  99

15 m CW SO2V contest  99

40 m CW SO2V contest  99

80 m CW SO2V contest  100

160 m CW SO2V contest                100

SO2V Split, listen on VFO A and VFO B, transmit on VFO B             100

SO2V Unsplit, listen on VFO A and VFO B, transmit on VFO A       101

SO1V VFO A only, listen on VFO A and transmit on VFO A              101

RIT toggle and zeroed    101

CW 30 WPM       101

CW 25 WPM       102

CW mode VFO A all bands            102

SSB mode all bands, VFO A          103

CW frequency 160-40m 104

CW frequency 30-17m   104

CW frequency 15-10m   105

SSB frequency 160-40m                105

SSB frequency 20-17m   106

SSB frequency 15-10m   106

AFSK DATA mode on all bands for RTTY contests               107

RTTY frequencies on all bands for RTTY contests                108

Setting a filter bandwidth             108

Toggle VOX on and off   108

Toggle AGC THR between 012 and 020   109

Using a K•Pod button to toggle AGC THR              110

Scan memory defined in channel 01        110

Recall memory defined in channel 01      110

Set DIGOUT1 on or off   111

Set DIGOUT1 on for 50 MHz and using ANT2        111

Toggle between SPKR+PH no and yes    111

Set the L-MIX-R to b b   112

Set the L-MIX-R to a b    112

Toggle L-MIX-R between b b and a b       113

Toggle power between 10 watts and 100 watts  114

Set power on all bands to the same value             115

Send messages 116

Send K3S/K3 message memories              116

Toggle TX Test on and off             116

Send call sign     116

Send signal report           116

5.4.2      K●Pod Macros  117

RIT On, K•Pod D4 on      117

RIT Off, K•Pod D4 off     117

Send your call sign and 599 report using the K•Pod          117

Toggle SPKR+PH yES/no                117

5.4.3      KX3 macros         118

Basic Split            118

Basic Unsplit       118

Normalize VFO A Filter. 118

Set and center VFO A filter          119

KX3 split, transmit VFO A, listen VFO B   121

KX3 split, transmit VFO B, listen VFO A   122

Exit split               122

Set up for 20 m CW         122

Set up for 20 m SSB         123

Set up for 20 m RTTY       123

Set up for 20 m PSK         124

Toggle AGC THR between 004 and 008   125

RIT toggle and zeroed    125

CW 30 WPM       126

CW 25 WPM       126

CW mode VFO A all bands            127

SSB mode all bands, VFO A          128

CW frequency 160-40m 129

CW frequency 30-17m   129

CW frequency 15-10m   130

SSB frequency 160-40m                130

SSB frequency 20-17m   130

SSB frequency 15-10m   131

Set AFSK DATA mode on all bands for RTTY contests        132

Set RTTY frequencies on all bands for RTTY contests        133

Set VFO B equal to VFO A             134

Setting a filter bandwidth             134

Toggle VOX on and off   134

Scan memory defined in channel 01        135

Recall memory channel 01           135

Toggle power between 10 watts and 100 watts  136

Emulate the K3S/K3 TX TEST function on the KX3               137

Set power on all bands to the same value             138

Send KX3 CW message memories            138

Send KX3 DVR message memories           139

Send call sign     139

Send signal report           139

Turn KX3 battery charger on       139

5.4.4      P3/SVGA and PX3 Macros            140

Quick set P3 or PX3 center frequency to VFO A  140

Set up for 20 m CW         140

Set up for 20 m SSB         140

Set up for 20 m RTTY       141

Set up for 20 m PSK         141

Offset Center Frequency             141

P3 Macro 8          142

P3 Macro 7          143

P3 Macro 6          143

KX3 Split plus offset PX3 display                144

Remove KX3 split, center PX3 on VFO A, set span 50 kHz               144

Set fixed mode adjust   145

Marker A, Marker B on  145

Marker A, Marker B off 145

QSY to Current Marker  145

Undo QSY to Current Marker      146

Turn on P3/SVGA Data Mode and Activate Text Decoding (CW mode only)           146

Turn off P3/SVGA Data Mode and Deactivate Text Decoding (CW mode only)     147

Toggle KX3 Text Decoding (Data modes only)      147

Comments